lookimeter.blogg.se - Zhejiang taotao b110

Make sure the kill switch is not engaged.Red wires go to the positive and green/black go to the negative terminal. Everything is included with your purchase. You will have to fill the battery with electrolytes (battery acid) and seal it. Make sure you have battery installed correctly.Once you have all the parts attached, You are now ready to start up your ATV. Strap battery to the casing if Applicable.Red wire with fuse casing, connect to the positive terminal (+) sing on battery.Red wire (positive) connects to the positive terminal (+) sing on battery.Black wire (negative) connects to negative terminal (-) sing on battery.Check screws to make sure they are tight.Attach the brake lever and starter on one side and the thumb throttle on the other side, screwing this on with a regular screwdriver.Adjust them to the height appropriate for the rider.Check the tire pressure to make sure it is appropriate to the size of the tires.Twist the pin with pliers to secure the bolt on the tire.

Make sure the bolts are on tight and screwed inappropriately to prevent them from falling out.

Lift the front of the ATV and attach the two front tires.

Then you will have to attach some parts : Once you have taken the bolts off you will need two people to lift it out of the frame. It will arrive in a steel cage inside a cardboard box.įirst, you will need to take off all of the cardboard that your four-wheeler was wrapped in. If you order the ATV through our website, you'll have some work to do. If you are located in CA, and you are picking up from our store, you can choose to have your ATV fully assembled and inspected by our trained mechanics.